Blog

MmWave antenna array feed design: Output ports are symmetrical but signal levels are not balanced?

2021-09-13T07:57:14+00:00

1. Introduction Fifth generation of mobile cellular networks (5G) is going to create a bridge to the future into the world of wireless technology due to the promising features

MmWave antenna array feed design: Output ports are symmetrical but signal levels are not balanced?2021-09-13T07:57:14+00:00

CDF calculation in 5G mmWave antenna design

2020-12-07T08:39:18+00:00

Mm-wave frequency bands are very appealing for telecommunication engineers due to available bandwidth and high data speed possibilities.  However, working with high frequencies brings new challenges such us extremely path loss and diffraction.

CDF calculation in 5G mmWave antenna design2020-12-07T08:39:18+00:00

Custom Antenna vs. Off-the-Shelf – Five Reasons to Design a Custom Antenna for Your Product

2023-02-22T14:48:09+00:00

When you are developing a connected, wireless product, the antenna is one of the most critical design areas. Because the user experience depends on how well your product connects!

Custom Antenna vs. Off-the-Shelf – Five Reasons to Design a Custom Antenna for Your Product2023-02-22T14:48:09+00:00

The importance of antenna in IoT product development

2023-02-22T14:49:59+00:00

The importance of an IoT product’s antenna cannot be overstated. It is the interface to the outside world. In this article I will discuss why the antenna is important

The importance of antenna in IoT product development2023-02-22T14:49:59+00:00

How can simulation-driven antenna design save in R&D investment?

2023-02-22T14:56:20+00:00

Developing hardware products is expensive and time-consuming. With wireless products, failing to select the right antenna solution can drive back moths in development if the issue is found too

How can simulation-driven antenna design save in R&D investment?2023-02-22T14:56:20+00:00
Go to Top